University of Minnesota
University Relations
http://www.umn.edu/urelate
612-624-6868
myU OneStop


 

Biomedical Functional Imaging and Neuroengineering Laboratory

College of Science & Engineering > Dept. of Biomedical Engineering


 

 

Postdoctoral Associate
ganghu@umn.edu


Research Interests
  • Medical Instrumentation
  • Medical Imaging
Education
  • 08/2006-06/2008  Postdoc Assistant in Tsinghua University, China
  • 09/2001-06/2006  Ph.D. in Biomedical Engineering, Huazhong University of Science and Technology, China
  • 09/1997-06/2001  B.E. in Control Engineering, Huazhong University of Science and Technology, China
Honors and Awards
  • Excellent Postdoc Research, Tsinghua University, China, 2008
  • Technical Achievement Scholarship, HUST, China, 2006
  • Excellent Student Schalorship, HUST, China, 1998-2001
Selected Publications
  • Gang Hu, Bin He, “Magnetoacoutic imaging of electrical conductivity of biological tissues with magnetic induction at a spatial resolution better than 2 mm” PLoS ONE 6: e23421, 2011.
  • Gang Hu, Erik Cressman, Bin He, “Magnetoacoustic imaging of human liver tumor with magnetic induction” Applied physics letters 98: 023703, 2011.
  • Gang Hu, Xu Li and Bin He,"Imaging biological tissues with electrical conductivity contrast below 1 S/m by means of magnetoacoustic tomography with magnetic induction" Applied Physics Letters , vol. 97, 103705, 2010
  • Gang Hu, Junjie Yao, Jing Bai, “Full-angle optical imaging of near-infrared fluorescent probes implanted in small animals”, Progress in Natural Science,18, 707-711, 2008.
  • Gang Hu, Junjie Yao, Jing Bai, “Fluorescent optical imaging of small animals using filtered back-projection 3D surface reconstruction method”, Proceeding of Conference on Biomedical Engineering and Informatics, 76-79,2008
  • Gang Hu, Quanhui Zhu, Anlian Qu. “Designing a Signal Conditioning System with Software Calibration for Resistor-feedback Patch Clamp Amplifier”.  Proceeding of IEEE-EMBS, 6729(1-4), 2005
  • Gang Hu, Anlian Qu. “Parameter Control System for Computer-controlled patch-clamp Amplifier”, Computer Measurement&Control,14(10), 2006
  • Gang Hu, Anlian Qu.“A Novel Design of the Current Monitor Pathway for Patch-clamp Amplifier”, Journal of Electronic Measurement Instrument, 21 (2), 2007


The views and opinions expressed in this page are strictly those of the page author.
The contents of this page have not been reviewed or approved by the University of Minnesota.